网站首页 >>

RME Fireface UFX 30-in/30-out, 192kHz USB/火线音频接口带DSP混音台

发布时间：1970-01-01编辑：DanceSmile阅读（）

60-channel Performance, in a Single Rackspace! When you demand uncompromising performance plus several I/O options from your audio interface, then you need RME's Fireface UFX. This outstanding USB 2.0/FireWire interface gives you 30 input and 30 output channels, digitally controlled preamps, a range of digital I/O options, and an onboard word clock. You'll love the Fireface UFX's included TotalMix FX DSP mixer and signal router; it maximizes what the Fireface UFX can do while it improves your workflow. The full-color front-panel display lets you meter plus view parameters and menus. The Fireface UFX can even be configured for standalone use as a preamp, a monitor mixer, an AD/DA converter, and more. If it's I/O flexibility you're seeking, then look no further than the Fireface UFX! You don't just get 12 channels of premium analog I/O; you also get AES/EBU, ADAT, S/PDIF, and MIDI I/O. You also get a rock-solid onboard word clock. RME did an outstanding job of making the Fireface UFX the ideal centerpiece for your studio setup. This incredible single-rackspace interface even includes built-in monitoring control. When you couple that functionality with the TotalMix FX DSP mixer/router, you have a total studio solution. RME Fireface UFX 30 x 30 USB/FireWire Interface Features: 24-bit/192kHz 30 Input / 30 Output channels 12 x Analog I/O 4 x Mic/Instrument Preamp, digitally controlled 1 x AES/EBU I/O 2 x ADAT I/O (or 1 x ADAT I/O plus 1 x SPDIF I/O optical) 1 x Word Clock I/O 2 x MIDI I/O 1 x FireWire 400 1 x USB 2.0 TotalMix FX DSP mixer/ signal router AD, Line-in 1-8, rear Signal to Noise ratio (SNR): 110dB RMS unweighted, 113dBA Frequency response @ 44.1kHz, -0.1dB: 5Hz - 21.5kHz Frequency response @ 96kHz, -0.5dB: 5Hz - 45.5kHz Frequency response @ 192kHz, -1dB: 5Hz - 66.5kHz THD: < -110dB, < 0.00032% THD+N: < -104dB, < 0.00063% Channel separation: > 110dB Input: 1/4" TRS jack, electronically balanced Input sensitivity switchable to Lo Gain, +4dBu, -10dBV Input level for 0 dBFS @ Lo Gain: +19dBu Input level for 0 dBFS @ +4 dBu: +13dBu Input level for 0 dBFS @ -10 dBV: +2dBV Microphone In 9-12, front Input: XLR, electronically balanced Signal to Noise ratio (SNR): 112dB RMS unweighted, 115dBA Gain range: 65dB Maximum input level, Gain 0dB: +12dBu Instrument In 9-12, front Input: 1/4" TS jack, unbalanced Signal to Noise ratio (SNR): 112dB RMS unweighted, 115dBA Gain range: 55dB DA, Line Out 3-8, rear Dynamic range (DR): 115dB RMS unweighted, 118dBA Frequency response @ 44.1kHz, -0.5dB: 5Hz - 22kHz Frequency response @ 96kHz, -0.5dB: 5Hz - 34kHz Frequency response @ 192kHz, -1dB: 5Hz - 50kHz THD: -104dB, < 0.00063% THD+N: -100dB, < 0.00% Channel separation: > 110dB Output: 1/4" TRS jack, servo-balanced Output impedance: 75 ohm Output level switchable Hi Gain, +4 dBu, -10dBV Output level at 0dBFS @ Hi Gain: +19dBuB Output level at 0dBFS @ +4dBu: +13dBu Output level at 0dBFS @ -10dBV: +2dBV DA - Stereo Monitor Output XLR (1-2) Output: XLR, balanced Output level switchable 24dBu, Hi Gain, +4dBu, -10dBV Output level at 0dBFS @ 24dBu: +24dBu DA - Stereo Monitor Output Phones (9-12) Output: 1/4" TRS stereo jack, unbalanced Maximum output level at 0dBFS, High: +13dBu Maximum output level at 0dBFS, Low: +2dBV Output impedance: 30 ohm AES/EBU XLR, transformer-balanced, galvanically isolated, according to AES3-1992 ADAT Optical 4 x TOSlink, format according to Alesis specification Standard: 2 x 8 channels 24-bit, up to 48kHz Double Speed (S/MUX): 2 x 4 channels 24 bit 96kHz Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192kHz Word Clock BNC, switch for internal termination 75 ohm RME's flagship Fireface UFX interface gives you the connectivity and premium sound quality you need for your ultimate DAW setup!